Ranked #61 in the Nation on Roofing Contractor Magazine's 2026 Top 100

Gutter Installation

Gutter installation puts new gutters and downspouts on your home or building to carry rain and snowmelt away from the roof, walls and foundation.

Gutters do a simple job that matters a lot. Without them, water pours off the roof edge, splashes against siding, soaks the soil next to the foundation and can end up in the basement. In Montana, gutters also have to handle heavy spring snowmelt and the ice that forms at the eaves. We size and pitch your gutters so water reaches the downspouts, and we place the downspouts where the water can drain away from the house. You can see the rest of our gutters work on the Gutter Service page. For the full map of services, cities and questions, open the Gutter Service PowerLink Matrix™.

Get a Free Estimate

What You Get

Here is what comes with a new gutter system from our team.

Gutters Sized for Your Roof

Bigger and steeper roofs shed more water. We size gutters and downspouts to match your roof area and pitch.

Proper Slope

Each run is pitched toward its downspout so water does not sit in the gutter, freeze and pull it loose.

Strong Hangers

Hidden hangers spaced closely along the gutter help it carry the weight of snow and ice.

Downspouts That Drain Away

Downspouts get extensions or splash blocks so water lands well away from the foundation.

Gutters and Montana Winters

When snow on the roof melts during the day and freezes at night, ice can build up in gutters and at the eaves. A gutter that is undersized, poorly sloped or loosely hung can sag or tear away under that weight. Good hangers and correct pitch make a big difference.

If you are getting a new roof, it is a great time to replace gutters too. The drip edge and gutter work together, and doing both at once lets us make sure water flows from the shingles straight into the gutter.

What Our Customers Say

Gutter Installation Near You

We install gutters on homes and commercial buildings in Billings, Bozeman, Belgrade and the surrounding towns.

How Gutter Installation Works

A gutter installation follows these steps.

01.

Measure the roof edges. We plan gutter runs and downspout spots.

02.

Check the fascia. Rotted fascia boards are repaired so the gutters have solid backing.

03.

Hang the gutters. Each run is pitched toward a downspout and fastened with hidden hangers.

04.

Install downspouts. We place them where water can drain away from the house.

05.

Test and clean up. We run water through the system to check the flow.

Choosing Gutters for Your Home

Aluminum is the most popular gutter material because it is light, does not rust and comes in dozens of colors. Steel is stronger and handles ice weight well, but it can rust once the coating wears. Copper looks beautiful and lasts a very long time, though it costs much more. For most Montana homes, a heavy-gauge aluminum gutter is a smart balance of strength and price.

Shape matters too. K-style gutters, with a flat back and decorative front, hold more water than half-round gutters of the same width. Downspout size is just as important as gutter size, since a big gutter that drains into a small downspout will still overflow in a summer downpour. We plan both together.

Gutter Installation FAQ

Many homes use 5-inch gutters, while larger or steeper roofs may need 6-inch gutters and bigger downspouts. We size them based on your roof area and pitch.

Often, yes. Old gutters can be damaged during roof work, and new drip edge works best with gutters set at the right height.

Guards can cut down on cleaning if you have trees nearby. They do not remove the need for occasional checks, especially in winter.

Most homes are done in a day.

Get Water Off Your Roof and Away From Your Home

Call us for a free gutter estimate. We will measure your home and recommend the right size and layout.

Scroll to Top