Ranked #61 in the Nation on Roofing Contractor Magazine's 2026 Top 100

Gutter Repair

Gutter repair fixes leaking seams, sagging sections, loose hangers and clogged downspouts so your gutters keep water flowing away from your home.

Not every gutter problem needs a whole new system. A leaking corner, a few loose hangers or a sagging run can often be fixed in one visit. We find the problem, repair it, clear the downspouts and make sure water flows where it should. If your gutters are too far gone, we will tell you so you can plan for replacement. It sits under our Gutter Service services, and the Gutter Service PowerLink Matrix™ lays out how each related page fits together.

Get a Free Estimate

What You Get

Here is what our gutter repair service covers.

Leak and Seam Repair

We reseal leaking corners, end caps and seams.

Re-Hanging and Re-Pitching

Sagging gutters get new hangers and are reset to the right slope so water does not pool.

Downspout Clearing

Clogged downspouts are cleared so water can drain.

Damage Checks

We look at the fascia and roof edge for water damage behind the gutters.

Why Small Gutter Problems Grow

A small leak at a corner drips on the same spot of siding or soil every time it rains. Over time that can stain siding, wash out soil next to the foundation and rot the fascia. In winter, water that sits in a sagging gutter freezes and adds weight, which can pull the gutter further away.

Fixing those problems early is usually quick and inexpensive, and it can add years to the life of your gutters.

What Our Customers Say

Gutter Repair Near You

We repair gutters on homes and businesses in Billings, Bozeman, Belgrade and nearby towns.

How Gutter Repair Works

Most gutter repairs follow this process.

01.

Inspect the gutters. We look for leaks, sags and clogs.

02.

Clear debris. Gutters and downspouts are cleaned so we can see the problem.

03.

Make repairs. Seams are sealed and hangers are added or replaced.

04.

Reset the pitch. Runs are adjusted so water flows to the downspouts.

05.

Test with water. We confirm the leaks are fixed.

Simple Habits That Keep Gutters Working

Most gutter problems start with debris. Leaves, pine needles and shingle grit settle in the bottom of the gutter, hold water and add weight. Cleaning gutters in late spring and again in late fall, after the leaves drop, prevents most clogs. After a big wind or hail storm, take a quick look from the ground for sags or dents.

In winter, watch for icicles that form along the same stretch every year. That can point to poor pitch, a clog or heat escaping into the attic. Note where it happens, and we can look at the cause when the weather breaks instead of just patching the symptoms.

Gutter Repair FAQ

The most common causes are clogs, a downspout that is too small or blocked, or a gutter that slopes the wrong way.

Usually, yes. New hangers and a pitch adjustment fix most sags, as long as the fascia behind them is solid.

At least twice a year, in spring and fall, and more often if you have trees close to the house.

If the damage is limited, yes. If seams leak in many places or the metal is rusting through, replacement is usually the better choice.

Fix Your Gutters Before the Next Storm

Call us to schedule a gutter repair.

Scroll to Top