Ranked #61 in the Nation on Roofing Contractor Magazine's 2026 Top 100

Wood Siding Installation

Wood siding installation gives your home the natural look of real cedar or other wood boards, installed and sealed to handle Montana weather.

Nothing looks quite like real wood. Cedar lap siding, board and batten and shakes give a home warmth and character, and they suit mountain-style homes around Bozeman and Belgrade. Wood also takes more care than most siding. It needs to be sealed or painted, kept off the ground and given a way to dry out if it gets wet. We install wood siding with the gaps, flashing and finishes that help it last. It sits under our Siding Contractor services, and the Siding Contractor PowerLink Matrix™ lays out how each related page fits together.

Get a Free Estimate

What You Get

Here is what comes with a wood siding installation.

Wood Choice Guidance

We explain the differences between cedar and other woods, and between lap, board and batten and shake styles.

A Rainscreen Gap When It Helps

On many wood jobs, a small air gap behind the boards lets them dry out after rain and snow.

Sealed Cut Ends

Cut ends soak up water fastest, so they are sealed before the boards go up.

Stain or Paint Plan

We talk through the finish and how often it will need care.

Wood and Montana Weather

Strong sun at high elevation breaks down finishes faster, and freeze and thaw can open small checks in the wood. A good finish, kept up every few years, protects the boards. Wood also does not like sitting wet, so we keep it well above the ground and the roof line.

If you love the look but not the upkeep, engineered wood like LP SmartSide is another option. It looks like wood but is treated to resist rot and moisture.

What Our Customers Say

Wood Siding Installation Near You

We install wood siding on homes in Billings, Bozeman, Belgrade and nearby towns.

How Wood Siding Installation Works

Wood siding goes up in this order.

01.

Prepare and flash the walls. A weather barrier and flashing go on first.

02.

Add furring strips if needed. These create a drying gap behind the boards.

03.

Prime and seal boards. Ends and backs are sealed.

04.

Install the siding. Boards are nailed with stainless or coated fasteners.

05.

Finish. Stain or paint is applied as planned.

Keeping Wood Siding Looking Good

Plan on a check every year or two. Look for areas where stain or paint is wearing thin, especially on the sunny south and west walls. Recoating before bare wood shows keeps the boards from drying out and cracking.

Keep sprinklers aimed away from the walls, trim bushes back so siding can dry, and keep snow from piling against the lower boards when you can. Small cracks can be filled and sealed before they spread. With a little attention, wood siding can look great for decades.

Wood Siding Installation FAQ

With regular staining or painting, cedar siding can last decades. Neglected wood can rot or split much sooner.

Often every few years for stain and somewhat longer for paint, depending on sun exposure.

Wood can dent and split in hard hail. Thicker boards hold up better than thin ones.

Engineered wood is made of wood strands bonded with resins and treated against rot and pests. It needs less care than natural wood.

Love the Look of Real Wood?

Call us for a free wood siding estimate.

Scroll to Top