Ranked #61 in the Nation on Roofing Contractor Magazine's 2026 Top 100

Rooftop Solar Panel Installation

Rooftop solar panel installation mounts solar panels directly on your roof, using flashing and racking that keep the roof watertight and the panels secure in wind and snow.

Most home solar systems in Montana go on the roof, where the panels can catch the most sun without taking up yard space. The big question with rooftop solar is how the panels attach. Every mount is a spot where water could get in if it is not flashed and sealed correctly. As a roofing company, we treat those mounts like any other roof penetration, with proper flashing tied into the shingles or metal. Rooftop Solar Panel Installation is one of the services on our Solar Energy Company page, and the Solar Energy Company PowerLink Matrix™ shows how every service, city and guide in this group connects.

Get a Free Estimate

What You Get

Here is what rooftop solar installation includes.

Roof Condition Review

We check the roof deck, shingles and framing before mounting anything.

Flashed Mounts

Each attachment point is flashed and sealed into the roof.

Racking for Snow and Wind

Racking is placed and fastened to handle Montana snow loads and wind.

Clean Wiring

Wires are routed neatly and protected from weather and critters.

Roof Type Matters

Asphalt shingle roofs use flashed mounts screwed into the rafters. Standing seam metal roofs can often use clamps that grip the seams, which means no holes at all. Flat roofs use different racking. We pick the method that suits your roof.

Snow is another factor. Panels shed snow fairly well once the sun hits them, but snow sliding off panels can land on walkways or gutters. We consider where it will fall when planning the layout.

What Our Customers Say

How Rooftop Solar Panel Installation Works

Rooftop solar goes up in these steps.

01.

Inspect the roof. We check condition and rafter locations.

02.

Lay out mounts. Mounts are placed over rafters.

03.

Install and flash mounts. Each one is sealed into the roof.

04.

Install racking and panels. Panels are secured and wired.

05.

Final checks. We inspect the roof and system together.

Planning Around Your Roof

Before the first mount goes on, we ask how old your roof is and how long you expect it to last. Panels are built to stay up for 25 years or more, so it makes sense to start with a roof that can match that. If your roof is near the end of its life, replacing it first avoids paying to remove and reinstall the panels later.

We also look at vents, chimneys and skylights. Panels need to stay clear of them, and roof vents should not be covered or blocked. A clean layout that works with the roof shape looks better and is easier to service.

Rooftop Solar Panel Installation FAQ

Not when the mounts are flashed and sealed correctly. Leaks usually come from poor mounting, which is why roofing experience matters.

Most roofs can hold solar, but direction, shading, age and roof material all matter.

They shade the roof from sun and some weather, which can slow wear on the covered area.

Snow usually slides off as the panels warm in the sun. You should not climb on the roof to clear it.

Put Your Roof to Work

Call us for a free rooftop solar consultation.

Scroll to Top